Shelf out your laundry and utility spaces in style.
Where clean clothes meet clean design.
No more closet avalanches or laundry room clutter. Shelfology brings calm to your utility chaos.
Easy install.
Most of Shelfology’s products are easy to install directly onto your existing walls. We provide drywall and masonry wall anchors with our shelves and accessories for hassle-free setup.
Stylish and sturdy.
Perfect for maximizing both function and beauty, our shelves, hooks, and accessories keep your utility spaces tidy and stylish, and hold up to the toughest of chores your house demands.
Wood and metal.
With Shelfology, customization is key—choose from an array of warm, natural woods or vibrant, colorful metals to create a look that’s uniquely yours.
Proof our customers have major shelf game.
In most laundry rooms, the detergent, the stain spray and the shirts that should be on hangers all end up on top of the dryer. Shelfology moves all of it onto the wall, with shelves, hooks and storage in solid hardwood and powder-coated steel that look as considered as anything in your kitchen. Picture a run of walnut over white machines on Army Brat (an olive green) brackets, a hanger hook in the same green beside it and a slim steel corner shelf at the end of the wall: three separate purchases that read as one plan, because Shelfology shares its woods and colors across its product lines.
Shelves Over the Washer and Dryer: Everything Off the Dryer, Nothing Out of Reach
Most laundry storage belongs on the wall above the machines, where everything is within reach the moment a load goes in, and Shelfology makes three very different shelves for that spot. The Aksel solid hardwood floating shelf hides its steel bracket inside the wood, so a single made-to-measure board can run the width of a side-by-side pair with nothing visible holding it up. The Roderick wall shelf does the opposite, setting a smooth hardwood slab on bold, round steel rods in the color of your choice, so the hardware becomes part of the look. The all-steel Tromso floating shelf is a crisp quarter-inch plate of powder-coated steel that carries more weight the shallower it gets: at 4″ deep, it’s rated to 410 pounds per linear foot.
Laundry Room Floating Shelves or a Bracket Shelf: Choose by Look and Load
- For a shelf that looks built in, choose the Aksel. The bracket disappears inside solid hardwood, and the length is made to measure for your wall.
- For hardware that shows, choose the Roderick. Its steel rods come in 28 colors, so the brackets can match a hook, a cabinet pull or nothing at all.
- For a damp wall or heavy jugs, choose the Tromso. All-steel construction handles humidity, and a shallow Tromso carries the most weight per foot.
Whichever you choose, depth is the real trade-off: a deeper shelf fits bins and stacks of folded towels, while a shallower one keeps jugs and spray bottles in a single reachable row.
Every shelf that spans the washer and dryer mounts into studs or solid blocking, and each one ships with its mounting hardware and an install guide.
As a general design guideline rather than a Shelfology spec, the bottom of a shelf usually sits about 18″ above a front-loading pair and about 24″ above a top-loader. If your washer loads from the top, open the lid all the way and measure before you settle on a height, since the open lid sets the lowest point a shelf can go. Our guide to planning a shelf over the washer and dryer works through depth, length and weight ratings, too.
Shop by Category
- Laundry Room Floating Shelves: Solid hardwood and all-steel floating shelves, made to measure to span a side-by-side washer and dryer.
- Wall Shelves With Steel Brackets: Solid hardwood shelves on round steel brackets in 28 colors, up to 84″ long.
- Hanger Hooks and Wall Hooks: Solid steel hanger hooks rated to 80 pounds per rod, plus rows of hooks for towels, aprons and bags.
- Steel Shelves for Supplies: Powder-coated steel shelves for detergent, dryer sheets and stain sticks, starting at 4″ deep.
- Utility Wall Storage and Pegboard: A stud-mounted steel rail for shelves, pegboard and hooks you can rearrange without new holes.
- Corner Shelves: Round or triangle steel corner shelves in three sizes, each rated to 80 pounds.
Laundry Room Shelving That Handles Humidity: Steam Happens
On wash day, the dryer’s heat, wet clothes and sometimes a utility sink leave a small room warm and a little steamy, and the right shelving takes it in stride. Powder-coated steel handles that humidity well, since its color is pigment fused to the metal under heat rather than paint brushed on top. That’s why the all-steel Tromso is a natural fit for the dampest wall in the room, as long as it stays clear of a faucet’s splash zone: powder coat resists humidity, but it isn’t waterproof. Choose a powder-coated finish over Raw Clearcoat or Raw Unfinished steel, which aren’t suited to humid rooms.
Every Shelfology wood shelf is solid hardwood straight through, with no MDF core to swell and no laminate face to peel. White oak, walnut, cherry and mahogany are the species to choose for a laundry room: the USDA’s Wood Handbook rates all four as decay-resistant, and Shelfology’s Clear Satin finish is moisture-resistant. Maple and alder are better suited to a laundry room with good ventilation.
Hanging Clothes to Dry Without Giving Up the Floor
Dress shirts, blouses and the workout gear you’d rather keep out of the dryer go straight from the washer onto a hanger, and too often that hanger ends up on a doorknob or the back of a chair. The Roderick Hanger Hook does the job of a hanging rod in a fraction of the wall space: instead of running along the wall, its single ¾″ solid steel rod projects straight out from it, with room for a row of shirts to air-dry beside the machines. It comes in 28 colors, so it can match a set of Roderick brackets, and it’s rated to 80 pounds when mounted into a stud, far more than a row of damp shirts weighs.
In a small room, that makes it a space-saving alternative to a folding drying rack, too: the hook holds shirts and blouses while they dry, and once the laundry is put away, nothing is left standing on the floor. The heavier things that tend to lean behind the door, like a folding ironing board or a step stool, go on a Studly Utility Hook, a heavy-duty steel hook that holds them against the wall and out of the walkway.
Small Laundry Room Ideas That Start in the Corner
In a small laundry room or a laundry closet, the corners and the narrow wall beside the machines are often the last open space. The Wink corner shelf fills the corner with 11-gauge steel in a round or triangle shape, in three sizes rated to 80 pounds each, plenty for the detergent and the fabric softener. On a narrow wall, the slim Bender steel wall shelf holds dryer sheets, stain sticks and a jar of clothespins close to the wall and out of the way.
When the washer and dryer are stacked, the strip of wall beside the pair is often the best storage spot in the room. A column of two or three shallow shelves there keeps supplies within easy reach, which a single deep shelf above the stack can’t do.
Laundry Room Wall Hooks and Pegboard, for the Laundry Bag That Never Had a Spot
Hand towels, an apron and the mesh bag for delicates are easiest to grab from a hook close to the machines. The Of Course wall hook lines up a row of three to nine powder-coated steel hooks with a clean, covered front that hides the mounting hardware. The Splendid puts a slim shelf on top of its own row of hooks, so a lint roller or a stack of rags can sit right above the towels. On the strip of wall between a door frame and the machines, a Peggy wall hook sets one, three or five steel rods on a single backplate, while the Runda brings warmth with hooks machined from solid hardwood. For a mudroom-style wall of hooks by the back door, the Entryway page has the full lineup.
For the small things that end up scattered across the top of the dryer, like clothespins, lint rollers and brushes, the Morgan magnetic pegboard is a laundry room pegboard that looks like part of the room. A solid birch face sits over a powder-coated steel backer that shows through the holes in color, and its shelves, hooks and cups snap into place on embedded magnets, so the layout can change whenever you want it to.
Garage Laundry and Utility Room Storage You Can Rearrange Without New Holes
When the washer and dryer share a garage, a basement or a utility room, the wall around them holds more than laundry: cleaning supplies, tools and the vacuum. The Studly Wall Storage System is built around one steel rail that mounts to the studs once. Steel shelves, a pegboard panel, 2x6 brackets and a workbench slab clip onto it and move as your needs change, without a single new hole in the wall. And when one heavy-duty shelf is all a wall needs, Studly FM utility brackets mount straight into the studs on their own. They don’t skip leg day, either: each one is rated up to 630 pounds. More ideas for a garage laundry wall are on the Garage page.
Laundry Room Colors and Woods: One Palette From the Shelf to the Hook
Shelfology makes the shelves, the hooks and the hardware, so a single wood species and powder-coat color can run through the whole laundry room, and a few separate pieces end up looking like one design.
- Powder-coat colors are Shelfology’s specialty, and the palette goes well past the white, black and builder grey of most laundry rooms. Most shelves, brackets and hooks come in 28 colors, with seven on the Studly system and six on the newer wall lines like Splendid, Of Course and Morgan. Concretey (a light warm grey), Arsenic (a neutral mid grey) and Tungsten (a dark warm grey) blend into a pale wall, while Army Brat and Steely Blue (a muted light blue) bring color to a white one.
- Hardwoods include solid white oak, walnut, maple, cherry, mahogany and alder, plus painted finishes on solid alder that let the grain show through.
- Cabinet hardware refreshes laundry cabinets without replacing them: Rem cabinet pulls bring color to the doors, and round Lowell or square Nolan cabinet feet lift a base cabinet for a lighter, furniture-style look.
Clear the Dryer for Good, With a Shelf Pro a Call Away
Shelfology shelves are made to order, and most orders ship in 6–9 business days, so it pays to settle the details before you buy. Wood swatches and metal swatches let you hold the walnut and the Army Brat up against your own wall and machines first. If you need a length, depth or color the menus don’t offer, Go Custom builds it to your spec. And if you’re still deciding between shelves, hooks and brackets, a Shelf Pro can talk it through at 949.244.1083 or through the contact page.
Explore Laundry Room Shelves, Hooks and Storage
- Shelves: Floating Shelves · Aksel · Tromso · Metal Floating Shelves · Roderick · Bender · Corner Shelves
- Hooks and storage: Hangers · Coat Racks · All Wall Hooks · Studly Wall Storage · Pegboards
- Hardware: Cabinet Pulls · Legs & Feet
- Related rooms: Entryway · Garage · Bathroom
Laundry Room Shelves and Storage FAQ
What shelves work over a washer and dryer?
Stud-mounted floating or bracket shelves long enough to span both machines work best over a washer and dryer. Shelfology makes three: the Aksel solid hardwood floating shelf, made to measure up to 118″ long; the Roderick wall shelf on steel brackets, 12″ to 84″ long; and the all-steel Tromso floating shelf, 6″ to 84″ long.
How much weight can a laundry room shelf hold?
A laundry room shelf’s capacity depends on the line. The all-steel Tromso is rated to 410 pounds per linear foot at 4″ deep and 90 pounds per linear foot at 12″ deep. Aksel brackets carry 50–95 pounds per hidden rod depending on the series, Roderick brackets carry 55 pounds each, and the slim Bender holds 7.5 pounds per linear foot for light supplies. Every rating assumes the shelf is mounted into studs.
How deep should a shelf over the washer be?
A shelf over the washer works best when it’s just deep enough for the largest container you’ll keep on it. Shelfology’s shelves for over the washer run from 4″ to 14″ deep: deeper shelves hold bins and folded towels, while shallower shelves keep bottles in one reachable row and, in steel, carry more weight per foot.
How high should a shelf be above a washer and dryer?
As a general design guideline, the bottom of a shelf over a washer and dryer usually sits about 18″ above a front-loading pair, which leaves room to reach the detergent drawer, and about 24″ above a top-loader, so the lid can open fully with room for your hand. To check a top-loader, open the lid all the way, measure to its highest point and add a few inches. These are common design guidelines, not Shelfology specifications.
Will shelves hold up to humidity in a laundry room?
Shelves hold up to laundry room humidity when they’re powder-coated steel or a decay-resistant solid hardwood. Powder-coated steel handles everyday laundry room humidity, and the USDA Wood Handbook rates white oak, walnut, cherry and mahogany as decay-resistant. Skip raw, uncoated steel finishes in a laundry room, along with MDF or laminate shelving, which can swell or peel as moisture works in.
Is powder-coated steel waterproof?
No, powder-coated steel isn’t waterproof. It handles humidity well, but constant direct water can cause rust over time, so keep it out of a sink’s splash zone.
Is wood or metal better for a laundry room?
Both wood and metal work in a laundry room, in different places. Steel is the stronger choice for a damp wall or heavy jugs, while solid hardwood adds warmth. Because Shelfology makes both, a walnut shelf on Steely Blue brackets and a Steely Blue hanger hook can share one wall.
Where can I hang clothes to dry in a small laundry room?
A wall-mounted hanger hook holds shirts on hangers to air-dry without using any floor space. The Roderick Hanger Hook is a space-saving alternative to a hanging rod or a folding drying rack: its solid steel rod projects out from the wall instead of running along it, and it’s rated to 80 pounds, 5″ to 11″ deep, in 28 colors.
What’s the strongest wall storage for a utility room?
Shelfology’s strongest utility room storage is the Studly line. The Studly Utility Hook holds 275 pounds, and the Studly FM Utility Bracket holds 190–630 pounds depending on size.
Do I need studs to mount laundry room shelves?
Yes. Shelfology recommends mounting every laundry room shelf, hook and rail into studs or solid blocking, and the shelves that span the washer and dryer require it. A loaded shelf works like a lever, pulling outward on its top screws, and drywall alone isn’t made to hold against that force.
What colors and woods are available?
Most Shelfology steel shelves, brackets and hooks come in 28 powder-coat colors; the Studly system comes in seven, and the newer wall lines like Splendid, Of Course and Morgan come in six. Wood shelves come in solid white oak, walnut, maple, cherry, mahogany and alder.