Aksel Premium Paint White Floating Shelf System

as configured + wishlist
Current stock: 0

Premium Floating Shelf
White Engineered Shelf



What's Included


 - Premium grade engineered shelf with a plywood base
 - High strength steel bracket hardware

If you've been looking for stunning designer shelves, our premium, cut-no-corners shelves are a perfect fit. Each shelf is smooth, built to your specified length, finished with our home brewed paint. Step-by-step instructions and online tutorials make it easy to install on masonry, sheetrock, plaster, or paneled walls.

Choose any length from 12 to 84 inches. All shelf options are 2" thick, available in 6", 8", 10", and 12" depths, and include heavy duty floating shelf bracket with set-through construction, 360° welds, and 90° junctions to fit precisely into mortises or dados. When mounted correctly, your floating shelves will support maximum distributed loads from 90 to 180 lbs., depending upon the specified length. This is not a cheap imitation. 




Each shelf is built out of plywood, MDF veneer and finished with our premium brewed paint.

 Due to a variety of wall conditions, fasteners are NOT included. We recommend GRK brand wood screws into studs and Toggler brand wall anchors between studs for supplementary support.

 - Premium Engineered Floating Shelf and Patented Steel Bracket
 - Materials: Love, Sweat Tears, Steel and American-ness
 - Only ships within United States.




1. First remove the set screws from your shelf and pull your hardware from the back of your shelf.

2. Position the hardware on the wall with the pre-drilled holes along the top edge. Mark the left-most hole on the stud, remove the hardware and drill a pilot hole. Reposition the hardware, drive a screw into the freshly drilled hole (nicely done, by the way), then use a level to position the right side of the hardware. Once it’s in position, mark the remaining holes on each stud, and drill a pilot hole for each. Raise the right side of your hardware into position, and drive the remaining screws into place.

3. Almost there... Slide your shelf over the bracket.

4. Replace set screws to secure your shelf.



Engineered Wood Shelf


This shelf is constructed with a plywood base and a MDF veneer.


Need Custom Floating Shelves?


We build special order floating shelves and floating shelf hardware. Send us your unique requests. 949.244.1083

Shelf hardware is made in the USA from 100% American Steel, love, sweat, tears, and industrial awesomeness.

Ships in 4-6 weeks

3 Reviews

sheila May 23rd 2018

high quality item

This shelf is made of excellent and durable materials. It's a very high quality item.

David Schmaus Apr 30th 2018

exceeded expectations!

Let’s face it. This is a lot to spend on a shelf and I had really high expectations. They were met and exceeded. The fit and finish on this shelf is perfect. The packaging was done perfectly even though fedex beat the box up the shelves were not harmed at all. I knew these were going to be heavy but I was still a little surprised. They are solid maple and yes they are heavy. I plan on 2x4 support in between my studs so they are as secure as possible. We plan on putting 100lbs of dishes on them. The turn around time was longer than I would have liked but in the end it was worth it. So I guess we are stoked.

Add a Review